Description Recommended Mix Ratio 1:200 So 1 Litre of Dipetane Treats 200 Litres of Petro Diesel or Domestic Kerosene Dipetane Diesel Treatments Bring Engine Benefits Eliminates Diesel Smoking Normally, visible diesel smoke is caused by partially clogged fuel injectors that drip fuel into the chamber instead of atomizing it. The dripped fuel doesn’t burn well resulting in black smoke. With Dipetane’s ability to keep your engine running clean, you’ll never have to worry about clogged fuel injectors! Easy on the Cylinders By reducing carbon particles, the “wear particle” responsible for the majority of engine wear, is also reduced. Oil stays cleaner from carbon soot and because fuel is more completely burned, oil dilution is reduced. Removes CCD’s Combustion Chamber Deposits (CCD’s) absorb oxygen, increase combustion temperatures and comprise the “wear particles” that scuff cylinder sleeves. Free up that oxygen and the chamber burns fuel like new. Remove the wear particle and the engine lasts longer. Dipetane Can Also be used in your Oil Fired Central heating System Save up to 10% Laboratory Tests by the University of Ulster showed an improved heating oil efficiency of 10.45%. Longer Boiler Life Dipetane improves the boiler lubricity, reduces wear and tear resulting in a longer boiler life. Less Smoke Up to 50% less smoke will lead to a reduction in external Emissions and no impact on neighbours. More Efficient Boiler Due to the better boiler lubricity less frequent boiler maintenance will be required. Dipetane is Unique It is a fuel treatment technology that is unique. It enhances the combustion process by burning more carbon. This results in more fuel efficiency, minimal carbon deposits and lower exhaust emissions. It is unique compared to other additives in that it is activated before and not after combustion occurs. In contrast other additives are all post combustion technologies, containing toxic chemicals with strong hazard warnings. What is Dipetane? Dipetane is a 100% hydrocarbon liquid fuel treatment as opposed to an additive. It contains nothing that is not already in the fuel. Dipetane assumes the characteristics of the fuel it is treating. It is a single product for all fuels. It has its own lubricant and it complies with all relevant British and USA Standards, including low sulphur fuels. Dipetane is “self-mixing” . That is to say: just add Dipetane to your fuel and that’s it. No Detergents No Cetane Enhancers No Octane Boosters No Heavy Metals Physical Properties of Dipetane Boiling point: 300-450° C Flashpoint (closed cap): 193°C Viscosity: 18.27 centistokes at 40°C Density at 15°C: 0.8623 kg/L Dipetane conforms to all relevant standards Chemical Properies of Dipetane Copper corrosion: Classification 1 according to IP 154/84 Ash content: 0.02% w/w Calorific value (gross): 19,660 BTU/LB 47,730 kJ/kg 10,927 Cal/g Elemental Analysis
